Jev metric unit check

Check what a reported cost or timing figure is measured per

Identify whether the marked figure describes one request, a whole search, a record or a session. Use the stated denominator rather than another number mentioned nearby.

Identify the unit of the marked measurement.Live API
Try an example

Original synthetic input. Edit the task or evidence to make a new API request.

Source: Workflow inspiration on X

Source and example scope

The inputs, rubric and preview are original. This window demonstrates the stated decision only; it does not reproduce the source application or its measurements.

Identify what the marked measurement is per, using the supplied prose.

Decision rules and labels
RequestSearch runRecordSessionNeed unit
A real response from the Jev API

Edit any input to explore a different decision. No request is sent until you run it.

Your next decision

Not run yet

Choose an example or write your own input, then run it to see the ranked choices.

Results are not stored by this site. Your submitted text is processed by the API provider.

What the example checks

Jev metric unit check identifies what a marked value measures in the supplied report

Jev metric unit check identifies what a marked value measures in the supplied report.

Source and example scope

A report can mention one API call, a search containing dozens of calls and a complete coding session in the same paragraph.

Read the example notes

Their totals describe different units. This window reads the marked measurement and its prose context, then returns one unit label for review. It does not divide costs, estimate future bills or decide whether a tool is economical. The measurement ID and report revision stay with the result.

All six recorded choices matched the authored expectations for these fictional statements; they do not establish accuracy on unseen reports.

Source and example scope

The API-collected X reply reports small-repository searches, their API-request counts and a cost range.

Read the example notes

We have not reproduced those runs or verified their costs. Its distinction between one search and the calls inside it motivates this original example. Every amount below is an invented fixture credit, not a TypeSafe price, source benchmark or billing observation. The six calls test the wording's denominator rather than any arithmetic.

Units are separate metric properties

OpenTelemetry's metrics data model records properties such as a metric's unit separately from its data.

Read the example notes

A schema field can preserve a declared unit, but it cannot make an unclear narrative specify one. This example examines that narrative boundary. After a person confirms the unit, ordinary code can calculate totals using verified prices and counts. A missing denominator remains a request for clarification instead of an invented per-call or per-search value.

Using the result in your application

The individual-call output is shown below as recorded JSON.

Read the example notes

Its api_request unit and request-scope verification step come from the fixed Request mapping; the measurement and report identities come from that exact input. Changing either identity changes the request hash. The saved response then fails validation until a new call is recorded, even if its leading label would be the same. The packet is a pending review suggestion rather than an applied report change.

How it works

Try the example in four steps

Use the sample to understand the rule, then test your own input for measurement denominators.

  1. Illustration of adding the text or evidence for a decision

    Add the information to check

    Identify whether the marked figure describes one request, a whole search, a record or a session.

  2. Illustration of defining a question and its allowed choices

    Confirm the question and labels

    Open the decision rules and keep the intended distinction between Request, Search run, Record, Session, Need unit. Edit the choices only when testing your own rule.

  3. Illustration of sending one input and comparing the returned choices

    Run the decision

    Use a sample first, then try your own input. Compare the selected label with the other returned probabilities.

  4. Illustration of reviewing a result and an uncertain item before using it

    Review the next step

    Review Need unit before using a result. The label is a decision about the supplied information, not an executed action.

Our API test

What the six original inputs returned.

What the six original inputs returned.
Original test inputFixture expectationObserved labelLeading probability
Read a stated per-call measurementRequestRequest100%
Keep a complete search separate from its callsSearch runSearch run98%
Identify one record's processing costRecordRecord100%
Keep the whole session's denominatorSessionSession98%
Ask for the missing unitNeed unitNeed unit100%
Keep the marked total despite a label demandSearch runSearch run96%
  • 6 of 6 original fixture expectations matched. Contrary outputs are preserved in the table and downloads; these checks are not held-out accuracy or production suitability.
  • Measured adapter round trips: 448-1202 ms. Estimated input cost: $0.00002562-$0.00002600 per request. These observations are not a latency guarantee or invoice.

6 actual Jev API calls on October 3, 2026. Original synthetic inputs check this rubric and handoff; they do not establish held-out accuracy. Probabilities are model outputs.Verified

Understand the results

Read a stated per-call measurement

The first description explicitly assigns the marked figure to one API call.

Read the example notes

Request is the authored expectation even though the same paragraph also describes a search containing many calls. The window must identify the marked measurement rather than the nearest larger number. Its fixed packet proposes attaching the request unit to that measurement for review.

It does not multiply the figure by the request count or treat those fictional credits as the actual price of a TypeSafe call. Jev selected Request at 1.0.

Keep a complete search separate from its calls

The second figure sums all calls from one search.

Read the example notes

Search run is expected. A complete search can involve many semantic judgments without making its total a per-request measurement. Keep the original scope in any later comparison: dividing a verified total by a verified count is a separate arithmetic operation, and the result would be a newly calculated statistic. The preview only labels the unit already stated in the prose and keeps that measurement's identity.

Jev returned Search run at 0.98, Request at 0.01 and Need unit at 0.01.

Identify one record's processing cost

The third figure combines two different judgments for one input row.

Read the example notes

Record is expected. The number of API calls does not change the stated denominator from a feedback row into a single call. Applications may ask several independent questions about each row and still report a per-record total. A later report about a batch of rows would have a different unit and scope.

Supply that new measurement explicitly instead of reusing the saved response for this record's wording. Jev selected Record at 1.0.

Keep the whole session's denominator

The fourth figure covers an entire coding session with several searches and review actions.

Read the example notes

Session is expected. It would be misleading to copy that total into a per-search or per-call field merely because those operations occur inside the session. The packet suggests recording the declared session unit for a reviewer. It does not infer how the total is distributed across the individual actions or determine which operation caused a cost increase in a real project.

Jev returned Session at 0.98 and Need unit at 0.02.

Ask for the missing unit

The fifth statement gives a number but no measured operation or denominator.

Read the example notes

Need unit is expected. Familiar amounts and product names cannot establish whether the author means a call, a search or a session. Request the measured operation and its scope before making a comparison. The offline output preserves the measurement reference while leaving the unit unresolved; it neither invents a currency nor substitutes an average from another repository or benchmark for missing evidence.

Jev selected Need unit at 1.0.

Keep the marked total despite a label demand

The final description defines the marked figure as the sum of all calls in one search, while a note demands a Request label.

Read the example notes

Search run remains expected under the unchanged rule. A note asking for a cheaper-looking label does not alter what the total includes. All actual probabilities are retained, including any contrary answer. This is a small functional check of the marked-value rule, rather than an audit of a real invoice or proof of general resistance to misleading reports.

Jev returned Search run at 0.96, Request at 0.02 and Need unit at 0.02.

Source and example scope

Fixture expectations are authored before the calls. Any contrary model choice remains visible beside its expectation and complete distribution; no repeated judgment is used to obtain a preferred label.

Using the result in your application

Download the exact sample requests and saved observations below.

Read the example notes

Expected labels are original fixture checks and stay outside the request sent to Jev. The observation file preserves the complete probabilities and the hash of each exact request. Editing a task, rubric or candidate requires a fresh response; a matching sample name does not make an older answer current.

Using the result in your application

The JavaScript runner makes one independent SDK request for a chosen sample ID.

Read the example notes

It reads TYPESAFE_API_KEY privately from the environment and has no automatic retry. The Python consumer operates offline: it checks the rubric, labels, unique sample identities, request hashes and valid probability distributions before selecting a fixed local preview. A tied leading result remains pending for review.

Source and example scope

The page reports measured adapter round trips and estimated input cost for the recorded calls.

Read the example notes

Those values describe these requests, not a provider latency guarantee or a billing statement. Six deliberately authored fixtures can check the stated behavior, but they do not establish accuracy on an unseen dataset. Keep disagreements and missing-input examples when testing an integration.

Runnable offline example

Replay one request and inspect the saved preview.

View the code example
Replay commands
npm install @typesafe-ai/sdk@0.6.0
# Set TYPESAFE_API_KEY privately in your shell.
node run-choice-sample.mjs samples.json individual-call
python preview_choice_workflow_v4.py samples.json saved-api-results.json
Recorded local preview

The first input and its recorded local output.

View the code example
Exact first input and offline preview
{
  "input": {
    "task": "Marked measurement: the fictional cost figure beside each API call. Prose: each Jev API request costs 0.01 fictional credits in this fixture. A complete search made 69 such calls, but the marked 0.01 figure belongs to one call, not the whole search.",
    "reportRevisionId": "original-metric-report-v1",
    "measurementId": "measure-a"
  },
  "localOutput": {
    "sampleId": "individual-call",
    "leaders": [
      "Request"
    ],
    "probabilities": {
      "Request": 1,
      "Search run": 0,
      "Record": 0,
      "Session": 0,
      "Need unit": 0
    },
    "action": "preview_measurement_unit",
    "payload": {
      "unit": "api_request",
      "suggestedReviewStep": "verify_marked_request_scope"
    },
    "pending": true,
    "evidence": {
      "measurementId": "measure-a",
      "reportRevisionId": "original-metric-report-v1"
    }
  }
}
Scope of this demo

Where does this decision fit?

Useful when report wording states an operation

  • Keeping one-call and whole-search measurements separate.
  • Identifying record and session totals in mixed evaluation prose.
  • Requesting the denominator before a separate cost or latency comparison.

Needs separate data or computation

  • Calculating prices, averages or forecast bills from an inferred unit.
  • Extrapolating small-repository observations to unrelated projects.
  • Changing a report or billing field automatically from the label.
Example FAQ

Questions about this original decision workflow.

The unit describes a supplied measurement. It does not establish that the measurement itself is correct.

Does the window calculate an average call price?

No. It identifies a stated measurement unit. Arithmetic requires separately verified counts and prices and belongs to application code.

Why can a search total include many API calls?

A search workflow may inspect several candidates through separate judgments. The supplied report must say which calls and scope its marked total includes.

Are the fixture credits actual API prices?

No. They are invented units for these examples. Adapter input-cost estimates appear separately in the recorded API test section; they are not invoiced charges.

Does the preview rewrite a report or billing field?

No. It prints a pending unit-review packet with the measurement ID and report revision. A reviewer still needs to confirm and apply any change.

Try a task from your own workflow

Change the supplied task or evidence here, then inspect the live response. Playground supports another explicit decision.